dmesg - Intel Core i5-3470
microcode: microcode updated early to revision 0x21, date = 2019-02-13
Linux version 5.3.0-19-generic (buildd@lgw01-amd64-053) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 (Ubuntu 5.3.0-19.20-generic 5.3.1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000de5ecfff] usable
BIOS-e820: [mem 0x00000000de5ed000-0x00000000dea6bfff] reserved
BIOS-e820: [mem 0x00000000dea6c000-0x00000000dea7bfff] ACPI data
BIOS-e820: [mem 0x00000000dea7c000-0x00000000deb9bfff] ACPI NVS
BIOS-e820: [mem 0x00000000deb9c000-0x00000000dee80fff] reserved
BIOS-e820: [mem 0x00000000dee81000-0x00000000dee81fff] usable
BIOS-e820: [mem 0x00000000dee82000-0x00000000deec4fff] ACPI NVS
BIOS-e820: [mem 0x00000000deec5000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: /DQ77CP, BIOS MKQ7710H.86A.0054.2012.1120.1444 11/20/2012
tsc: Fast TSC calibration using PIT
tsc: Detected 3192.727 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 0E0000000 mask FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf]
check: Scanning 1 areas for low memory corruption
Kernel/User page tables isolation: disabled on command line.
BRK [0x26b401000, 0x26b401fff] PGTABLE
BRK [0x26b402000, 0x26b402fff] PGTABLE
BRK [0x26b403000, 0x26b403fff] PGTABLE
BRK [0x26b404000, 0x26b404fff] PGTABLE
BRK [0x26b405000, 0x26b405fff] PGTABLE
BRK [0x26b406000, 0x26b406fff] PGTABLE
BRK [0x26b407000, 0x26b407fff] PGTABLE
BRK [0x26b408000, 0x26b408fff] PGTABLE
BRK [0x26b409000, 0x26b409fff] PGTABLE
BRK [0x26b40a000, 0x26b40afff] PGTABLE
BRK [0x26b40b000, 0x26b40bfff] PGTABLE
RAMDISK: [mem 0x2d029000-0x3280bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL )
ACPI: XSDT 0x00000000DEA70080 00007C (v01 INTEL DQ77CP 00000036 AMI 00010013)
ACPI: FACP 0x00000000DEA7A1D8 00010C (v05 INTEL DQ77CP 00000036 AMI 00010013)
ACPI: DSDT 0x00000000DEA70188 00A04F (v02 INTEL DQ77CP 00000036 INTL 20051117)
ACPI: FACS 0x00000000DEB9A080 000040
ACPI: APIC 0x00000000DEA7A2E8 000072 (v03 INTEL DQ77CP 00000036 AMI 00010013)
ACPI: FPDT 0x00000000DEA7A360 000044 (v01 INTEL DQ77CP 00000036 AMI 00010013)
ACPI: TCPA 0x00000000DEA7A3A8 000032 (v02 INTEL DQ77CP 00000036 MSFT 01000013)
ACPI: MCFG 0x00000000DEA7A3E0 00003C (v01 INTEL DQ77CP 00000036 MSFT 00000097)
ACPI: HPET 0x00000000DEA7A420 000038 (v01 INTEL DQ77CP 00000036 AMI. 00000005)
ACPI: SSDT 0x00000000DEA7A458 00036D (v01 INTEL DQ77CP 00000036 INTL 20091112)
ACPI: SSDT 0x00000000DEA7A7C8 0009AA (v01 INTEL DQ77CP 00000036 INTL 20051117)
ACPI: SSDT 0x00000000DEA7B178 000A92 (v01 INTEL DQ77CP 00000036 INTL 20051117)
ACPI: DMAR 0x00000000DEA7BC10 000080 (v01 INTEL DQ77CP 00000036 INTL 00000001)
ACPI: ASF! 0x00000000DEA7BC90 0000A5 (v32 INTEL DQ77CP 00000036 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
NODE_DATA(0) allocated [mem 0x41dfca000-0x41dff4fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000de5ecfff]
node 0: [mem 0x00000000dee81000-0x00000000dee81fff]
node 0: [mem 0x00000000deec5000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000041dffffff]
Zeroed struct page in unavailable ranges: 4411 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041dffffff]
On node 0 totalpages: 4181701
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14205 pages used for memmap
DMA32 zone: 909097 pages, LIFO batch:63
Normal zone: 51072 pages used for memmap
Normal zone: 3268608 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xde5ed000-0xdea6bfff]
PM: Registered nosave memory: [mem 0xdea6c000-0xdea7bfff]
PM: Registered nosave memory: [mem 0xdea7c000-0xdeb9bfff]
PM: Registered nosave memory: [mem 0xdeb9c000-0xdee80fff]
PM: Registered nosave memory: [mem 0xdee82000-0xdeec4fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288
pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 4116339
Policy zone: Normal
You have booted with nomodeset. This means your GPU drivers are DISABLED
Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
Unless you actually understand what nomodeset does, you should reboot without enabling it
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16249864K/16726804K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 476940K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 43189 entries in 169 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000dea03000 end: 0x000000dea0ffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0573ac161, max_idle_ns: 440795292132 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.45 BogoMIPS (lpj=12770908)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (25541.81 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdea7c000-0xdeb9bfff] (1179648 bytes)
PM: Registering ACPI NVS region [mem 0xdee82000-0xdeec4fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 18:39:18, date: 2019-11-01
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1572633558.036:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99528B563000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99528B55C400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99528B7E5000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 16 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf6120000-0xf612ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf613c000-0xf613c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 0x14: [mem 0xf613a000-0xf613afff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf6100000-0xf611ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf6139000-0xf6139fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6138000-0xf61383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6130000-0xf6133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6137000-0xf61373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6136000-0xf61367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6135000-0xf61350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1244] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:02:02.0: [109e:036e] type 00 class 0x040000
pci 0000:02:02.0: reg 0x10: [mem 0xec101000-0xec101fff pref]
pci 0000:02:02.1: [109e:0878] type 00 class 0x048000
pci 0000:02:02.1: reg 0x10: [mem 0xec100000-0xec100fff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xde5ed000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdee82000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [io 0x0a30-0x0a4f] has been reserved
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c31 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xec200000-0xec200fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 2 [mem 0xec100000-0xec1fffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:02: resource 13 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 24242 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23339 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 89996K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xda5ed000-0xde5ed000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 71)
tpm tpm0: TPM is disabled/deactivated (0x7)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-19-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-19-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x2, revision=0x21
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (637064971, 13643310)->(656045891, -5337610)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8b9a1a94c85156edc8bdd8557ee76ac2d955915c'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 11:148:695
ivb_uncore 0000:00:00.0: hash matches
rtc_cmos 00:01: setting system clock to 2019-11-01T18:39:19 UTC (1572633559)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2668K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1416K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
IPMI message handler: version 39.2
ipmi device interface
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ahci 0000:00:1f.2: version 3.0
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cryptd: max_cpu_qlen set to 1000
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 241
AVX version of gcm_enc/dec engaged.
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
AES CTR mode by8 optimization enabled
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.129 Mon Jul 22 21:10:21 PDT 2019 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.129 Tue Jul 23 00:29:03 PDT 2019
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6136000 port 0xf6136100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf6136000 port 0xf6136180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xf6136000 port 0xf6136200 irq 28
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf6136000 port 0xf6136380 irq 28
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:be:f7:0d:a1:95
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-10: ADATA SU800, R0427ANR, max UDMA/133
ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATAPI: ASUS DRW-22B2ST, 1.00, max UDMA/100
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/133
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-10: WDC WD6001FZWX-00A2VA0, 01.01A01, max UDMA/133
ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD6001FZWX-0 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
scsi 1:0:0:0: Direct-Access ATA ADATA SU800 7ANR PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: CD-ROM ASUS DRW-22B2ST 1.00 PQ: 0 ANSI: 5
sda: sda1 sda2 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 3192.739 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e057f0c4ab, max_idle_ns: 440795258168 ns
clocksource: Switched to clocksource tsc
usb 1-1.1: New USB device found, idVendor=046d, idProduct=c32b, bcdDevice=92.01
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: Gaming Keyboard G910
usb 1-1.1: Manufacturer: Logitech
usb 1-1.1: SerialNumber: 196134663636
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Keyboard G910 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C32B.0001/input/input2
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c21f, bcdDevice= 3.05
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Wireless Gamepad F710
usb 2-1.5: Manufacturer: Logitech
usb 2-1.5: SerialNumber: CA6F9E64
hid-generic 0003:046D:C32B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G910] on usb-0000:00:1a.0-1.1/input0
input: Logitech Gaming Keyboard G910 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C32B.0002/input/input3
usb 1-1.2: new full-speed USB device number 4 using ehci-pci
input: Logitech Gaming Keyboard G910 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C32B.0002/input/input4
hid-generic 0003:046D:C32B.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G910] on usb-0000:00:1a.0-1.1/input1
usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Hub 2.0
usb 1-1.2: Manufacturer: ALCOR
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.4: new full-speed USB device number 5 using ehci-pci
usb 1-1.4: New USB device found, idVendor=12cf, idProduct=0170, bcdDevice= 7.11
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Tt eSPORTS BLACK Gaming Mouse
usb 1-1.4: Manufacturer: DEXIN Corp.
input: DEXIN Corp. Tt eSPORTS BLACK Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:12CF:0170.0003/input/input7
hid-generic 0003:12CF:0170.0003: input,hidraw2: USB HID v1.11 Mouse [DEXIN Corp. Tt eSPORTS BLACK Gaming Mouse] on usb-0000:00:1a.0-1.4/input0
input: DEXIN Corp. Tt eSPORTS BLACK Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:12CF:0170.0004/input/input8
input: DEXIN Corp. Tt eSPORTS BLACK Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:12CF:0170.0004/input/input9
hid-generic 0003:12CF:0170.0004: input,hidraw3: USB HID v1.11 Keyboard [DEXIN Corp. Tt eSPORTS BLACK Gaming Mouse] on usb-0000:00:1a.0-1.4/input1
usb 1-1.2.1: new full-speed USB device number 6 using ehci-pci
usb 1-1.2.1: not running at top speed; connect to a high speed hub
usb 1-1.2.1: New USB device found, idVendor=0bda, idProduct=0116, bcdDevice=16.03
usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.1: Product: USB2.0-CRW
usb 1-1.2.1: Manufacturer: Generic
usb 1-1.2.1: SerialNumber: 20021111153705700
usb-storage 1-1.2.1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.2.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-1.5: new full-speed USB device number 7 using ehci-pci
usb 1-1.5: New USB device found, idVendor=08bb, idProduct=2702, bcdDevice= 1.00
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Burr-Brown Japan PCM2702
usb 1-1.5: Manufacturer: Burr-Brown Japan
usb 1-1.2.4: new full-speed USB device number 8 using ehci-pci
usb 1-1.2.4: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.4: Product: USB Hub 2.0
usb 1-1.2.4: Manufacturer: ALCOR
hub 1-1.2.4:1.0: USB hub found
hub 1-1.2.4:1.0: 4 ports detected
usb 1-1.6: new full-speed USB device number 9 using ehci-pci
raid6: sse2x4 gen() 15120 MB/s
usb 1-1.2.4.2: new low-speed USB device number 10 using ehci-pci
raid6: sse2x4 xor() 10451 MB/s
raid6: sse2x2 gen() 12661 MB/s
raid6: sse2x2 xor() 8550 MB/s
usb 1-1.6: New USB device found, idVendor=0951, idProduct=16a4, bcdDevice= 0.03
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: HyperX 7.1 Audio
usb 1-1.6: Manufacturer: Kingston
usb 1-1.6: SerialNumber: 00000000
usb 1-1.2.4.2: New USB device found, idVendor=0665, idProduct=5161, bcdDevice= 0.02
usb 1-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.4.2: Product: USB to Serial
usb 1-1.2.4.2: Manufacturer: INNO TECH
hid-generic 0003:0665:5161.0005: hiddev1,hidraw4: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:1a.0-1.2.4.2/input0
raid6: sse2x1 gen() 10471 MB/s
raid6: sse2x1 xor() 7659 MB/s
raid6: using algorithm sse2x4 gen() 15120 MB/s
raid6: .... xor() 10451 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
input: Kingston HyperX 7.1 Audio Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.3/0003:0951:16A4.0006/input/input10
scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
input: Kingston HyperX 7.1 Audio as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.3/0003:0951:16A4.0006/input/input11
input: Kingston HyperX 7.1 Audio as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.3/0003:0951:16A4.0006/input/input12
hid-generic 0003:0951:16A4.0006: input,hiddev2,hidraw5: USB HID v1.11 Device [Kingston HyperX 7.1 Audio] on usb-0000:00:1a.0-1.6/input3
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /run/xrdp/xrdp.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-sesman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
systemd[1]: /etc/systemd/system/phabricator-ssh.service:4: Unknown lvalue '3User' in section 'Service', ignoring
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[490]: Received request to flush runtime journal from PID 1
ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned.
ashmem: initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
usb 1-1.5: usbmixer: master volume quirk for PCM2702 chip
input: Logitech Gamepad F710 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13
usbcore: registered new interface driver xpad
usb 1-1.6: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
usb 1-1.6: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/4096/1
usbcore: registered new interface driver snd-usb-audio
resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: RAPL package-0 domain package locked by BIOS
bttv: driver version 0.9.19 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0)
bttv: 0: Bt878 (rev 17) at 0000:02:02.0, irq: 17, latency: 32, mmio: 0xec101000
bttv: 0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input19
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input20
tveeprom: Huh, no eeprom present (err=-6)?
bttv: 0: tuner type unset
bttv: 0: registered device video0
bttv: 0: registered device vbi0
pktcdvd: pktcdvd0: writer mapped to sr0
Adding 78110716k swap on /dev/sda5. Priority:-2 extents:1 across:78110716k FS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1572633584.794:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=963 comm="apparmor_parser"
audit: type=1400 audit(1572633584.794:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=964 comm="apparmor_parser"
audit: type=1400 audit(1572633584.794:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=966 comm="apparmor_parser"
audit: type=1400 audit(1572633584.794:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=966 comm="apparmor_parser"
audit: type=1400 audit(1572633584.794:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/surf" pid=962 comm="apparmor_parser"
audit: type=1400 audit(1572633584.794:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=970 comm="apparmor_parser"
audit: type=1400 audit(1572633584.798:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=968 comm="apparmor_parser"
audit: type=1400 audit(1572633584.798:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=972 comm="apparmor_parser"
audit: type=1400 audit(1572633584.798:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=972 comm="apparmor_parser"
audit: type=1400 audit(1572633584.798:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=972 comm="apparmor_parser"
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
systemd-journald[490]: Failed to read journal file /var/log/journal/03cdee45699d4540b287966efd78ae62/user-1000.journal for rotation, trying to move it out of the way: Text file busy
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller os_map_kernel_space.part.0+0x100/0x140 [nvidia] mapping multiple BARs